LAP Laser, LLC, Kentucky, EE. UU.
GENERAL TERMS AND CONDITIONS
TERMS OF PURCHASE OF LAP LASER, LLC
Status May 17, 2017
LAP LASER, LLC (“LAP Laser”) agrees to sell and the purchaser indicated in the Sales Proposal attached hereto (“Purchaser”) agrees to purchase from LAP Laser, the products distributed by LAP Laser and described in the Sales Proposal (the “Ordered Products”), for the prices and on all the other terms and conditions stated in the Sales Proposal, these Terms of Purchase, and the License Conditions for the use of the software in and/or supplied with the Ordered Products (the Sales Proposal together with these Terms of Purchase and License Conditions shall be referred to herein as the “Agreement” or the “Purchase Agreement”). Acceptance is limited to the terms of the Purchase Agreement. LAP Laser objects to any different or additional terms contained in any purchase order, offer or confirmation sent or to be sent by Purchaser, which are expressly rejected.
2. Effective Date; Title; Risk of Loss
The Agreement will be effective on the date of acceptance of the Agreement by Purchaser. Title to the Ordered Products will pass to Purchaser upon full payment by Purchaser of purchase price, freight, insurance costs (if Purchaser elected and paid for insurance), taxes and other costs related to the sale by and delivery of the Ordered Products from LAP Laser. All risk of damage to or loss of the Ordered Products shall pass to Purchaser when the Ordered Products are tendered to a carrier in Erlanger, Kentucky as set forth below. LAP Laser does not provide insurance for the Ordered Products. If Purchaser elects to purchase insurance, then Purchaser shall bear complete and exclusive respon-sibility for promptly advising the carrier and insurer of any loss or damage and for filing claims against, and recovery of any sums owed by, the carrier or the insurer.
3. Terms of Shipment
All products will be shipped F.C.A. Erlanger, Kentucky, unless the Sales Proposal stipulates a different shipment term. For purposes of the Agreement, F.C.A. Erlanger, Kentucky shall mean that: (i) LAP Laser must at its own expense and risk, transport the Ordered Products to a location in Erlanger, Kentucky where tender may be made to a carrier for shipment to Purchaser’s final destination.; (ii) Purchaser must, at its own expense and risk, load and transport the Ordered Products from Erlanger, Kentucky to its final destination. Purchaser shall obtain insurance on the Ordered Products at Purchaser’s election as set forth in Section 2 above. In the absence of specific instructions, LAP Laser will select a carrier to make delivery to Purchaser’s final destination, but the carrier will not be construed to be an agent of LAP Laser.
4. Pricing; Terms of Payment and Additional Charges
The purchase price for the Ordered Products is specified in Purchase Agreement and, unless otherwise agreed by the parties in writing, the price does not include any shipping, insurance, taxes, duties or any other charges which may be applicable to or incurred in connection with the sale, delivery and installation of the Ordered Products.
Payment of the Purchase Price and costs of freight, shipping, handling and other costs related to delivery of the Ordered Products shall be payable as set forth in the Purchase Agreement.
The total unpaid purchase price and costs of freight, shipping, handling and other costs not previously paid will be due 30 calendar days after delivery or service and receipt of LAP Laser invoice. If Purchaser fails to pay any amounts owed to LAP Laser pursuant to the Purchase Agreement when due and payable, Purchaser agrees to pay all costs, including reasonable attorneys’ fees expended in efforts to collect these amounts and, in addition, Purchaser shall pay to LAP Laser a monthly late payment charge equal to one percent (1%) of Purchaser’s outstanding balance owed.
If LAP Laser is properly notified by Purchaser of a requested delay in the shipping date within seven (7) days prior to the previously scheduled shipping date (which date is set forth on the Sales Proposal and identified as “Req Ship Date”), then LAP Laser will store the Ordered Products for a period of thirty (30) days free of charge to the Purchaser. All storage costs and related charges incurred after the expiration of said 30-day period shall be paid by the Purchaser.
If any payments to be made by Purchaser are required to be made on the original shipping date, then the notification by Purchaser of a delay in the original shipping date shall not relieve the Purchaser of its obligation to make payments to LAP Laser on said original shipping date in the amount(s) and for the costs and services specified in the Agreement.
LAP Laser will advise Purchaser of the scheduled delivery date of the Ordered Products. Installation of the Ordered Products is optional with any costs of installation to be borne by Purchaser. If Purchaser elects to have LAP Laser install any of the Ordered Products, then, prior to shipment, Purchaser, at its own expense, will prepare its premises for installation of the Ordered Products and will provide all installation facilities, including space, electrical power, other utilities, services, lighting, air conditioning, ventilation, and the like in accordance with LAP Laser’s site preparation specifications. The initial installation may be performed by LAP Laser or its authorized agent during LAP Laser’s normal working hours and such installation shall be at Purchaser’s expense. Purchaser will provide the necessary labor for unpacking and placement of the Ordered Products when necessary and only when directed to do so by LAP Laser. Purchaser shall not unpack the Ordered Products outside of LAP Laser’s supervision. If installation or removal of the Ordered Products by LAP Laser or its authorized agent is precluded by local law, any agreement, or otherwise, LAP Laser will supervise the installation or removal and Purchaser will bear any additional costs caused thereby. If Purchaser installs any of the Ordered Products, then Purchaser assumes all risks associated with such installation. Purchaser shall also pay for any additional costs incurred by LAP Laser or its authorized agent as a result of any installation rescheduling or alteration of original installation plans, design, or layout. In the event that Purchaser elects to have LAP Laser install any of the Ordered Products, pays for such installation, and fails to schedule the installation for a date that is less than twelve (12) months from the actual date that the Ordered Products are delivered to Purchaser, then (i) LAP Laser shall not be required to refund the monies paid for installation, (ii) LAP Laser shall be relieved of any duty to install the Ordered Products, and (iii) Purchaser hereby agrees to forfeit said monies to LAP Laser as consideration for LAP Laser devoting its resources to the planned and never scheduled installation. LAP Laser will provide procedures for the testing and operation of the Ordered Products.
7. Compliance With Laws and Ordinances
Purchaser shall be responsible for compliance with local laws, rules, codes, registration, regulations and ordinances, including, but not limited to obtaining any permits or approvals necessary for such compliance. LAP of America provides no warranty regarding compliance of its product with any such laws, rules, codes, registration, regulation or ordinances.
When LAP Laser installs the Ordered Products, the Ordered Products shall be considered accepted by the Purchaser upon Purchaser’s execution of a product acceptance form (the “Factory acceptance test”) which will be present-ed by LAP Laser and shall be executed by Purchaser upon completion of applicable start-up and acceptance testing. Use of the Ordered Products by the Purchaser, its agents, employees or licensees for whatever reason without written release from LAP Laser shall also constitute Purchaser’s acceptance of the product.
When LAP Laser is not the installer of the Ordered Products, no Product Acceptance Form is required and the Ordered Products are deemed accepted by Purchaser when they are tendered by LAP Laser to the carrier for shipment to Purchaser.
Prior to execution of the Product Acceptance Form by Purchaser, LAP Laser may, at its option, repair or replace any defective or non-conforming parts.
9. Security Interest
Purchaser hereby grants to LAP Laser and LAP Laser reserves unto itself, a security interest in the Ordered Products to secure payment of the purchase price stated in the Sales Proposal. Such security interest shall be deemed satisfied only upon Purchaser’s payment of such purchase price in full. Pur-chaser hereby appoints LAP Laser as its attorney in fact to sign and file financing statements on Purchaser’s behalf with appropriate state authorities in order to protect LAP Laser’s security interest. Purchaser agrees, upon request of LAP Laser, to execute and deliver to LAP Laser one or more financing statements and/or such other documents as LAP Laser may deem necessary to evidence the security interest granted by Purchaser to LAP Laser in a form satisfactory for filing with appropriate state authorities.to defer payments, agreements on the term of bills of exchange or payment by instalment, in this case all the customer’s liabilities due to us shall become due for payment immediately.
10. Limited Warranty
The Ordered Products furnished hereunder are warranted to be free from defects in material and workmanship for the lesser of twelve (12) months from the date of execution of the Factory acceptance test Purchaser, or fifteen (15) months from the date the Ordered Products are tendered by LAP Laser to the carrier for shipment. LAP Laser will, at its own expense and option, either repair or replace the defective Ordered Products, or any part thereof, as necessary provided that the Purchaser has notified LAP Laser, and upon inspection, LAP Laser, in its sole discretion has found such Ordered Product to be defective in material or workmanship only. The Purchaser’s sole and exclusive remedy hereunder will be limited to such repair or replacement.
The foregoing warranties are contingent upon the proper use of the Ordered Products in accordance with LAP Laser’s published instructions and specifica-tions and may not apply to any Ordered Products or any part thereof which have been improperly installed, repaired or modified by persons other than LAP Laser or which have been subjected to accident, abuse, incorrect use, neglect or alteration.
THE WARRANTIES SET FORTH HEREIN ARE LIMITED WARRANTIES AND ARE THE ONLY WARRANTIES MADE BY LAP LASER.
LAP LASER EXPRESSLY DISCLAIMS, AND PURCHASER HEREBY EXPRESSLY WAIVES, ALL OTHER EXPRESS WARRANTIES AND ALL DUTIES, OBLIGATIONS AND WARRANTIES IMPLIED IN LAW, INCLUD-ING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
11. Limitation of Remedies
The sole remedies for breach of any and all warranties and the sole remedies for LAP Laser’s liability of any kind with respect to the Ordered Products or services provided hereunder in connection with installation, or otherwise, and any other performance by LAP Laser under or pursuant to the Agreement shall be limited to the remedies provided in the applicable warranty paragraphs hereof. In no event shall LAP Laser’s liability to the Purchaser for damages of any nature exceed the purchase price of the Ordered Products if the liability results therefrom, or the total charges paid or payable for services performed under the Agreement if the liability arises from services provided by LAP Laser hereunder.
Purchaser agrees that LAP Laser shall not be liable for any special, incidental, indirect, punitive or consequential damages or for the loss of profit, production, revenue or data even if LAP Laser shall have been advised of the possibility of such potential loss or damage.
Purchaser shall indemnify and hold harmless LAP Laser its employees, agents, officers and directors from and against third party suits, claims, demands, liabilities, costs or expenses, losses, settlements, judgments and awards, and actions, including reasonable attorneys’ fees, costs, and damages, that may at any time be incurred by any of them by reason of any claims, suits, administra-tive proceedings or criminal investigations arising from, related to, or pertaining to the use of the Ordered Products, their installation, maintenance or any other assistance furnished by LAP Laser or its agents with respect to the Ordered Products.
13. Terminations or Assignment
Purchaser may cancel the Agreement until such date that is three (3) weeks prior to the scheduled date of delivery without any charge. If Purchaser elects to cancel the Agreement with less than three (3) weeks remaining until delivery, then Purchaser shall pay a restocking charge of 15%. Notwithstanding anything set forth herein, NO refunds will be permitted on orders for custom-built products regardless of when cancellation is requested. Following acceptance of the Agreement by Purchaser, the Agreement including the order in the Sales Proposal, may only be assigned by Purchaser with LAP Laser ‘s prior written consent. In the event that Purchaser defaults under any of the provisions hereof, LAP Laser shall have the right to terminate the Agreement. Any assign-ment by Purchaser without LAP Laser’s prior written consent shall be void and of no force and effect.
If Purchaser defaults hereunder or if a petition under any bankruptcy or insol-vency law is filed by or against Purchaser:
a. LAP Laser, in addition to other remedies, may repossess any Ordered Products previously delivered hereunder for which payment in full has not been received by LAP Laser;
b. At LAP Laser’s option, LAP Laser shall be relieved of all further obligations hereunder or may delay further shipments of Ordered Products; and
c. Purchaser shall be liable to LAP Laser for all of LAP Laser’s costs of collection and repossession, including LAP Laser’s attorneys’ fees incurred in connection there with.
The Agreement shall not constitute the grant of any right or license to use or license to use or reproduce any computer software portions of the Ordered Products and any license granted by LAP Laser to Purchaser shall be evidenced by License Conditions to be executed by Purchaser. The Agreement may not be amended or modified except by a writing signed by Purchaser and LAP Laser. If any term or provision, or any portion thereof, of the Agreement, to any extent, be invalid or unenforceable, the remainder of the Agreement shall not be affected thereby, and each term and provision of the Agreement shall be valid and enforceable to the fullest extent permitted by law. Acceptance is limited to terms of this Agreement. LAP Laser objects to any different or additional terms contained in any purchase order, offer or confirmation sent or to be sent by Purchaser, which are expressly rejected. This Purchase Agreement is conditional on Purchaser’s agreement to all terms and LAP Laser is otherwise unwilling to proceed with this transaction. This is the final expression of the Agreement and there will be no waiver or modification of any of these terms unless in writing signed by both parties. If LAP Laser does expressly make any further agree-ment regarding the Ordered Products, all terms of the Agreement shall be final. The performance by LAP Laser under the Agreement shall be governed, and the Agreement shall be construed and interpreted in accordance with, the laws of the State of Kentucky and the Uniform Commercial Code as adopted in Kentucky. Any dispute arising out of or relating to the Agreement shall be brought only in a court of competent jurisdiction located in Boone County, Kentucky. Neither the Revised American Foreign Trade Definitions, nor the International Chamber of Commerce definitions (INCOTERMS) shall govern this transaction. LAP Laser’s rights as provided for herein are in addition to any other rights which may be provided by law.
16. Confidential Information
Purchaser agrees to maintain in confidence and not to disclose, reproduce or copy any materials, documents or specifications which are marked confidential or proprietary and which are provided to Purchaser hereunder. Purchaser acknowledges that any unauthorized disclosure or use of the confidential information would cause LAP Laser imminent irreparable injury and that LAP Laser shall be entitled to, in addition to any other remedies available at law or in equity, injunctive relief in the event the other party breaches or threatens to breach its obligations under this Section.
Unless otherwise provided in the Agreement, any notice requirement hereunder to the parties hereto will be deemed to have been duly given if in writing and delivered personally or mailed by first class, registered or certified mail, postage prepaid, and if intended to be given to Purchaser at the address of Purchaser set forth in the Purchase Agreement, and if intended to be given to LAP Laser, at the address of LAP Laser as set forth in the Purchase Agreement (on the first page of the Sales Proposal).
Erlanger, May 17, 2017
LAP Laser, LLC
1830 Airport Exchange Boulevard, Suite 110
Erlanger, Kentucky 41018
Status May 2017
The following license conditions apply to the use of the software in the equipment, or to the use of the software in and/or supplied with the equipment of LAP Laser, LLC, an Ohio limited liability company (hereinafter referred to as "Program"):
In these license conditions, the following terms shall be interpreted as indicated:
- (a) "Licensor" means LAP Laser, LLC.
- (b) "licensor" means any party that grants a license to LAP/the Licensor to use or license/sublicense the Program.
- (c) "Third-Party Software" means software other than the Program that has been delivered together with the Program and/or the Equipment of LAP.
- (d) "User" means i) a contractual partner of LAP to whom the use of the Program is granted by these license conditions and/or ii) a person or entity to which the use of the Program has been granted by means of sublicensing (end user) by authorized users as described under i) ac-cording to these license conditions.
- (e) "Pass on the Program": any means of transferring the Program to a third party other than User, including but not limited to by handing out a copy of the Program, granting access or use in any way to the Pro-gram, granting the possibility to download the Program, etc.
- (f) "Procurement risk" means assumption of all risks of potential loss or damages to a product in the process of providing the product until the delivery to the customer, especially the risk for the fulfilment of demands, supply and performance risks and the risk during transportation as well as storage risks etc.
LAP Laser, LLC (hereinafter referred to as "Licensor" or "LAP") or its licensors exclusively shall have all rights of use to the Program.
The Licensor shall grant the User the non-exclusive right to use and copy the Program provided in the object code if the respective copy is required to use the Program. A required copy includes in particular the installation of the Program from the original data carrier to the mass storage device of LAP’s hardware product used as well as the loading of the Program into its random access memory. Furthermore, the User may use the Program only to the extent stipulated in the contract.
The User may make a copy for backup purposes. However, in principle only one single backup copy may be made and kept. This backup copy must be identified as backup copy of the Program provided.
The User shall be obliged to prevent unauthorised access to the Program by third parties by taking appropriate precautionary measures. Original data carriers supplied and the backup copies must be kept in a secure location protected from unauthorised access by third parties. The User shall specifically instruct its employees to comply with the foregoing contractual conditions and the provisions of the United States Copyright Law.
Unless otherwise permitted under paragraph (4) above, the User may not make any further copies, and this shall also include the printing of the Program code.
The User may only modify and extend the Program, if this is expressly permitted by law or is agreed contractually with LAP as Licensor. The Licensor draws attention to the fact that even minor modifications can result in significant, unforeseeable faults in the running of the Program and other Third-party software. The User is therefore specifically warned against making any unauthorised modifications to the Program; the User shall bear the risk alone.
If it is legally admissible to decompile the Program, before decompiling the Program, the User shall request the Licensor in writing, setting an appropriate time limit, to provide the information and documents required to achieve interoperability. Only after expiration of the time limit without result the User shall have the right to decompile. Before calling in a third party, the User shall provide the Licensor with a written statement from the third party that this third party gives an undertaking directly to the Licensor to comply with the stipulations in paragraphs (4) to (7).
The User shall in principle only have the rights to third-party software supplied which are required to use it together with the Program. This shall not in principle include any right to adapt or Pass on the Program. The use of third-party software shall furthermore be governed exclusively by the licence conditions / conditions of use of the respective licensor which shall be provided by the licensor on behalf of the licensor.
The User may use the Program on any LAP hardware available to the User. If the User, however, changes the hardware, the User must delete the Program from the hardware hitherto used.
The User may make the Program available to a third party only if the User waives its own use of the Program uniformly, completely and finally, and the Program is only to be used on LAP hardware. By passing on the Program, the old User’s right to use the Program shall expire. The Program may not be rented.
The written consent of the Licensor shall in any case be required to Pass on the Program. The Licensor shall give its consent if the User submits a written declaration by the new User stating that the new User gives an undertaking to the Licensor to comply with the conditions agreed for using and passing on the Program, and if the User warrants to the Licensor in writing that the User shall Pass on all the original copies of the Program to the third party, and that it has deleted all copies the User has made itself, subject to paragraph (4) hereto. The Licensor can refuse its consent if the use of the Program by the new User conflicts with its legitimate interests.
The User may not make the Program available to third parties if there are reasonable grounds to suspect that the third party will violate the contractual conditions, in particular will make unauthorised copies. This shall also apply to the User’s employees.
The User shall be obliged in any case, if the Program is passed on, to notify the Licensor immediately of its intention to Pass on the Program and to inform the Licensor of the name and full address of the buyer in writing.
The liability of the Licensor shall be unlimited for damages caused with intent or by gross negligence of legal representatives or executives of the Licensor and for personal injury i.e. for injury to life, limb or health, where a guarantee or Procurement risk is given. Furthermore, the following shall apply:
- In the case of damages caused with intent or by gross negligence of ordinary vicarious agents of the Licensor, the liability of the Licensor shall be limited to the damages which were typical and foreseeable when the contract was concluded. Furthermore, liability for damages caused by slight negligence shall be excluded unless a material contractual obligation is violated. “Material contractual obligations” are obligations that protect the legal positions of the User which are material to the contract and which have to be granted to the User under the contract in terms of subject matter and purpose. Material contractual obligations are also obligations whose fulfilment makes the due performance of the contract possible in the first place, where the User regularly relies on and may rely on compliance with such obligations.
- In the case of violation of a material contractual obligation due to negligence, liability to compensate shall also be limited to typical and foreseeable damage. Apart from this, liability for damages caused by negligence shall be excluded in the case of violation of other obligations.
- In the event of data being lost or destroyed, the Licensor shall be liable under this liability regime only if the Licensor has caused the destruction with intent, gross negligence or as a result of a violation of a material contractual obligation, and the User has at the same time ensured that the destroyed data, which is kept in machine-readable form, can be reconstructed from the data material at reasonable expense.
- The liability of the Licensor for each individual case of damage shall be limited to maximum liability coverage of USD 500,000.00. This shall not apply if LAP is culpable of fraudulent intent, intent or gross negligence, to claims due to injury to life, limb or health and in the case of a claim arising from tort or an express additional guarantee or assumption of a Procurement risk or in cases of different higher liability coverage prescribed by law.
- The above stipulations on the limitation of liability shall also apply for the benefit of the Licensor’s employees.
- The burden of proof shall not be reversed by reason of the above terms and provisions.
If a third party makes justified claims due to the violation of property rights by the Program, LAP shall be liable to the User as follows, whereby the stipulation of paragraph (15) shall not be affected:
- LAP shall first at its option try at LAP’s expense either to obtain a right of use for the deliveries in question or modify the Program while complying with the characteristics agreed under the contract so that the property right is not infringed, or exchange the Program. If LAP cannot do so on reasonable conditions, the User shall be entitled to its legal rights which shall be limited by the stipulations in paragraph (15).
- The User shall, in the event of infringement of property rights by the Program only be entitled to rights if it gives LAP written notification immediately about the claims asserted by third parties, does not admit any infringement and all defensive measures and settlement negotiations are reserved for LAP.
- If the User stops using the Program for reasons of damage mitigation or other good cause, the User shall be obliged to advise the third party that cessation of use is not deemed to be an acknowledgement of a property right infringement.
- If an appeal is filed by third parties against the User for infringement of property rights resulting from the use of the Program licensed by LAP, the User undertakes to notify LAP immediately and to give LAP the opportunity to participate in any legal action. The User must support LAP in every way in conducting such legal action. The User must not take any action which could impair LAP’s legal position.
The User’s claims shall be excluded if the User is responsible for infringement of a property right. The User’s claims shall also be excluded if the infringement of the property right is due to an application which LAP could not foresee or is caused by the Program being modified by the User, or used with products LAP did not deliver, if the infringement of the property rights is based on this.
Claims by the User for damage from this contractual relationship may only be asserted within a preclusion period of one year as of commencement of the statutory limitation period. This shall not apply, if LAP is culpable of fraudulent intent, intent or gross negligence, to claims due to injury to life, limb or health, and in the case of a claim arising from tort or an express additional guarantee or assumption of a Procurement risk.
These Licence Conditions are governed exclusively by the law of the State of Kentucky, United States of America and the courts located in Boone County, Kentucky shall have exclusive jurisdiction to determine any disputes, which may arise out of, under, or in connection with these License Conditions.
Place of performance and legal venue is the location of the Licensor’s registered office.