Laser Triangulation Sensors
ANTARIS SERIES: THE BEST SENSOR BY FAR
ANTARIS sensors work by the triangulation principle. Single sensors measure displacement, depending on combination and arrangement you may measure thickness, width, height, straightness, flatness, position or you may check for completeness or double layers.
Based on a Digital Signal Processor (DSP), the intelligent signal processing controls exposure time of the CCD array and laser power in realtime. Due to this concept, LAP laser sensors measure very precise and very fast - even on surfaces with changing colours and reflectivity. If large measurement ranges or off sets are needed, ANTARIS is the right match.
Beside standard models, you may get customized sensors. There is a special version ANTARIS BAND. ANTARIS BAND has a short line instead of the measuring spot.
- Measuring ranges up to 4000 mm
- Measuring range and off set customizable
- Digital from measurement to evaluation
- Fastest measurement, up to 4 kHz
- Also available with line
|350||620||± 50||± 140 / 0,04|
|800||500||± 100||± 320 / 0,04|
|1250||750||± 150||± 500 / 0,04|
|500||890||± 70||± 200 / 0,04|
|1000||1000||± 130||± 400 / 0,04|
|2000||1300||± 260||± 800 / 0,04|
|4000||1550||± 520||± 1600 / 0,04|
|* derived from DIN 32877, average from 64 single values ** % of measuring range|