LASER SENSORS

ATLAS Series

Laser Triangulation Sensors

ATLAS SERIES: SMALL AND VERSATILE

ATLAS sensors work by the triangulation principle. Single sensors measure displacement, depending on combination and arrangement you may measure thicknesswidthheightstraightnessflatness, position or you may check for completeness or double layers. The pure digital data processing from CMOS to evaluation software eliminates all sources of errors occuring in analogue measurement. Still an analogue output 4 ... 20 mA is available.

Benefits:

  • Smallest size
  • Maximum accuracy
  • Digital from measurement to evaluation
  • Fastest measurement, up to 4 kHz (10 kHz)
  • Parametrizable

TECHNICAL DATA

MODEL DATA

Model Measuring range
[mm]
Offset
[mm]
Repeatability*
(time) [µm]
Measurement uncertainty*
(Accuracy) [µm]/[%]**
LAP ATLAS 10 10 25 ± 1 ± 2 / 0,02
LAP ATLAS 40 40 60 ± 3 ± 6 / 0,015
LAP ATLAS 100 100 100 ± 10 ± 15 / 0,015
* derived from DIN 32877, average from 64 single values    ** % of measuring range
show allhide

GENERAL DATA

Laser data

Laser type Diode
Wavelength 670 nm
Colour of beam red
Laser power 1 mW
Laser class 2
show allhide

Measuring data

Measuring principle Triangulation
Measuring frequency parametrizable, up to 4 kHz (optional 10 kHz)
show allhide

Electronics data

Operating voltage DC 18 ... 30 VDC
Power consumption < 250 mA
show allhide

Housing data

Enclosure rating IP 67
Dimensions [L×W×H] 80 mm × 65 mm × 32 mm
Weight ca. 250 g
show allhide

System data

Application conditions 0 ... +40 °C, 35 - 85 % rel. humidity, non-condensing
show allhide