LINE LASER

LD Series

LAP LD lasers are a perfect match for nearly every gap and like to change their working place

LD LASER: SMALL AND VERSATILE

Due to manual focussing from 30 mm to ∞, you may achive an extremely fine laserline at any working distance. This makes the LD laser the right choice for applications with changing working distances and projection positions. Flexibility is supported by the small housing, allowing to easily fix the laser on working place machines or rails.

  • Focusable
  • Point, Line, Cross
  • Smallest housing
  • Reverse polarity protected
  • Available opening angles line: 10°, 20°, 30°, 40°, 80° (standard)
  • Available opening angles cross: 38°, 62°(standard)

Compare devices

Compare

Compare devices with each other and find the optimal solution for you. Then adjust your device to your requirements in the Configurator.

TECHNICAL DATA

MODEL DATA

Line lasers

No data
show allhide

Crosshair lasers

Models Laser power Laser class Laser class        
    62° 38°                                                
LAP 1 LDX 1 mW 1 1        
LAP 3 LDX 3 mW 1 1        
LAP 5 LDX 5 mW 2 1        
LAP 10 LDX 10 mW 2M 2        
LAP 15 LDX 15 mW 2M 2        
LAP 30 LDX 30 mW 2M 2M        
showhide

Point lasers

Models Laser power Laser class                                                            
LAP 1 LDP 1 mW 2          
LAP 3 LDP 3 mW 3R          
LAP 5 LDP 5 mW 3R          
LAP 10 LDP 10 mW 3B          
LAP 15 LDP 15 mW 3B          
LAP 30 LDP 30 mW 3B          
showhide

GENERAL DATA

Laser data

Laser type diode
Wavelength 635 nm
Laser colour red
show allhide

Optics data

Divergence 0.5 mrad
Focus adjustment manually, without tools
show allhide

Electronics data

Operating Voltage DC 4 ... 6 VDC
Power consumption < 200 mA
show allhide

Housing data

Enclosure rating IP 54
Dimensions Length 81 mm × Ø 19 mm (front) / 15 mm (back)
Weight 40 g
Power connector M8, 3-core
show allhide

System data

Application conditions -10 ... +40 °C, 35 - 90 % rel. humidity, non condensing
Output power 1 ... 30 mW
show allhide