PRO-SOFT 5 ST

LASER PROJECTION SOFTWARE
single tasking version of
software for 3D surfaces

PRO-SOFT 5 ST - BASIC LASER PROJECTION SOFTWARE FOR 3D SURFACES

click to enlarge
Screenshot PRO-SOFT 5 ST

 

For projection on 3D surfaces PRO-SOFT ST is the right choice. The single tasking version can control complex work areas with up to 16 projectors. More projectors can be connected with customized solutions. Projectors may be placed with offset to each other, turned by 90°, facing each other or crosswise to cover contorted or twisted shapes.

Supported file formats: lpd, ply, IGES, dxf ... CATIA optional

CALIBRATION WITHOUT TARGETS

Calibration may be handled by selecting single prominent coordinates on the surface of the object. There is no need for drill holes or glued-on reflectors.

TARGET CHECK

Target positions are scanned in freely selectable intervals. If deviations are detected, a warning is displayed and the projection is stopped. Alternatively, an automatic re-calibration is triggered.

CHOICE OF VIEW

Projection data can be displayed on the monitor in 7 views: front/behind, right/left, above /below and isometric. For overview, all contours may be shown simultaneously. For details or relations you may zoom in or out.

OPERATING MODES

There are three operating modes available:

  • production mode: projection data is displayed strictly in the predetermined order. Skipping steps or preview of later steps is not possible.
  • simulation mode: displayed elements can be selected freely, simultaneous projection of different data is possible. 
  • testing mode: software is operated without projection hardware. This mode is for preparing the CAD data. Items to be projected can be checked for consistency and compliance with calibration data.

DISPLAY OF OBJECT NAME

You can display the name of the currently projected element as laser text by remote control.

AUTOMATIC LOAD OF UPDATED FILES

With connection to the operator‘s network, updates of projection files are detected and automatically loaded.

CATIA IMPORT

An optional import module directly handles data in CATIA format. No format change is necessary.
 

DOWNLOADS

Brochures